.

Communication

A robot must be able to communicate, either between its components, with other robots or remote computers. This category gathers all communication modules for your robot: standard radio protocols such as Xbee, Bluetooth, Wifi, standard wired communication module (USB, FTDI, RS232, CAN ...).

Active filters

The Bluno is a microcontroller designed for projects integrating the Bluetooth 4.0 technology. It combines an Arduino Uno board and a Bluetooth 4.0 module (BLE) in a single piece of hardware.

In Stock

Want to control and optimise your data rate without using UART? Get the CC3000 WiFi module and its dedicated WiFi Breakout Board and you can integrate the Internet into your projects!

In Stock

This USB Audio Adapter, built around the CM108AH chipset, is equipped with 2 jacks and will adapt to all projects on ODROID.

In Stock

Although tiny, the 433 MHz ISM WT-4432G Radio Transceiver Module will open doors to numerous Arduino electronics projects!

In Stock
€19.71 €21.90 -10%

The Makeblock-Me USB Host v1 allows you to easily connect your Makeblock board to a USB device.

In Stock

No more ethernet cable needed with this WiFi dongle! With the EW-7811 Edimax nano key, you can easily connect your Raspberry Pi to internet. What's more, it's compact and perfectly compatible with the Raspberry Pi!

Out-of-Stock

Use this Me RJ25 Adapter Module to increase the connection possibilities of your Makeblock Me base board.

In Stock

The SparkFun XBee Explorer Regulated board is the ideal interface for connecting your XBee modules and your microcontroller, whether 3.3V or 5V compatible.

In Stock

The EM-406 Connector Breakout allows you to connect the wires of compatible GPS modules to easily develop your microcontroller.

In Stock

The Seeed Studio BLE Shield will allow you to incorporate the Bluetooth Low Energy technology into all your low-speed data transmission projects.

In Stock
€1.30

The Qwiic Adapter provides the perfect means to make any I2C board into a Qwiic-enabled board.

In Stock

This WRL-12571 XBee WiFi Module with Wire Antenna strikes an ideal balance between the simple software and hardware associated with the XBee modules and the Digi WiFi communication technology.

In Stock

Add the Bluetooth functionality to your computer thanks to the Bluno dongle TEL0087 (BLE). This module can be used as a receiver or a transmitter.

In Stock

The Feather Huzzah is a small board embedding WiFi and USB connectivity options, that you can program on Arduino or with Lua. A big thank you to the Adafruit team!

In Stock

The Adafruit Bluefruit Feather is a miniature development board that includes a BLE module, USB port, battery connector and enough memory to let your imagination go wild!

In Stock

This Arduino-compatible miniature development board embarks a fast and efficient WiFi module and an ATSAMD21G18 processor with plenty of memory space. It is thin, light, and lets you fly!

In Stock

This very easy to use module based on the HC-05 Bluetooth XBee Chip is compatible with all XBee sockets.

In Stock

Offering a long range and low power consumption, the XBee Pro 60 mW PCB Antenna - Series 1 by SparkFun will solve all your inter-device communication problems!

In Stock

The Me WiFi Module v1 allows long-distance communication with a PC or smartphone, for controlling all your Makeblock creations.

In Stock

The Me Bluetooth Module v1 (dual mode) is a small Bluetooth 2.0 and 4.0 compatible module you can use on all your iOS and Android devices.

In Stock

The 2.4G Wireless Serial Module is the ideal accessory for use in classrooms when numerous groups need a WiFi connection to work on their project.

In Stock
€35.30

The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.

In Stock