Use this FR11-H101K set to assemble your Dynamixel KL430 or XC430 servos and design a joint for a mobile robot.
Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
This heavy duty 3-pin ribbon cable is compatible with the Dynamixel AX and MX actuators.
Pack of 10 TTL communication cables for the Dynamixel X-series servomotors.
FP04-F18 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).
With this pack of X4P 240 mm cables, you get 10 4-pin Dynamixel cables of the highest quality to connect your XM-430 Dynamixel servos.
The Dynamixel FR13-H101K kit can be used to create an articulated frame for your Dynamixel X540 servo motor.
A set of 4 frames compatible with the X330 servo motor to make it easier for you to mount your servo in your robotics project.
10 x 24cm cables with 4 pin connectors for Dynamixel DX, RX and EX series servomotors
Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.
The FPX330-S102 set contains all the parts you need to mount and attach your Dynamixel X330 servo.
The new Dynamixel servo has arrived, and Robotis has developed a whole series of structural component sets so you can mount your XM-430 without mishap. The FR12-S102K set is one of them.
Kit containing horn, frame and bearing for Dynamixel actuators
The OpenRB-150 is a next-generation, open-source, Arduino compatible embedded controller.
When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.
Horn, black frame and bearing set for Dynamixel EX-106+ and MX-106 actuators
Mounting plate for Dynamixel actuators RX24F, RX-28 and MX-28
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
10 cables (10cm length) with 4 pin connectors for the Dynamixel actuators of the MX (R version), RX and EX series.
The Trossen Robotics 350 mm 3-pin cable is a go-to Dynamixel actuator project accessory.
This set of 5 FP04-F9 side mounting frames is designed for the Bioloid robotics kits by Robotis.
The X4P 100 mm cable is designed especially for connecting your Dynamixel XM-430 servos quickly and efficiently. You’ll find it hard to do without this Robotis cable!
Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 130 mm Cables for XL Servos.