You can use this set of structural components for Dynamixel XL330 servos to add a joint to your robotics project.

The DYD-15-051 high-precision gear is a cycloid-based reducer designed to offer optimum strength and robustness throughout its 5,000 hours of use.

This gear set is designed to replace the gear parts on the X540 servo motors equipped with a reduction ratio of 270:1.

This metal gear set is designed to last longer and resist abrasion. The gears are compatible with all servo motors in the Dynamixel X540-150 series with a TTL or RS-485 connection.

A standard robot cable for connecting securely to your waterproof Dynamixel servo motors.

This 4-pin extension cable is 1 metre long and compatible with the servo motors in the Dynamixel XW series.

This structural component and idler for the Dynamixel XW540 servo is one of various sets proposed by Robotis for assembling servos in different configurations.

This structural component is designed specifically for the Dynamixel XW540, to fix your servo in the position that suits you best.

Use this structural component designed for the Dynamixel XW540 series to attach one side of a servo.

Use this FR11-H101K set to assemble your Dynamixel KL430 or XC430 servos and design a joint for a mobile robot.

You can now power, connect and program all your Dynamixel servos, whatever the model, thanks to this official and very clever Dynamixel starter set.

Dynamixel X-series compatible cable (TTL), length 50 cm.

35cm long cable for Dynamixel X-series servo motors, TTL protocol.

Use the compatible Dynamixel FRP54-H121K structural components to mount your Dynamixel Pro 54-100 servo securely onto an articulated frame.

Use the Dynamixel FRP54-H221K structural components to mount your Dynamixel Pro 54-200 servo onto an articulated frame.

The FRP42-H121K Set is designed to fit Dynamixel Pro 42-Series servomotors.

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

The CS-10 color sensor can detect up to 6 colors.

The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!

This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.

This bracket set for Dynamixel MX-64 or MX-106 servos is great for creating a new joint on your robotics project.

The Dynamixel HN13-N101 horn set is designed to adapt to the output shafts on Dynamixel XH-series and XM540 servos.

With the FR04-G101GM set from Robotis, you’ll get the same gripper frames as the ones used for the GP robot.

The FP04-F8 frames from Robotis are designed to adapt perfectly to the Dynamixel AX-series servo motors.