This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
The CM-150 Controller is used for programming robotics kits like the Robotis Dream Level 2. It will allow you to connect numerous components, for example sensors, gearmotors and LED modules.
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.
When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.
The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.
The Roboteq SBL 2360 controller can drive two brushless DC motors, with or without sensors, in sinusoidal or trapezoidal mode.
The Roboteq SBL 1360 A controller allows you to control motors up to 30A and 60V equipped with a Hall effect sensor or with no sensor thanks to a trapezoidal control mode.
The Roboteq SBL 1360 A controller allows you to control motors up to 30A and 60V equipped with a Hall effect sensor or with no sensor thanks to a trapezoidal control mode.
This very compact Roboteq controller allows you to control a brushed DC motor while delivering high power and output voltages.
This high-power brushed motor controller can drive up to 3 motors simultaneously with a high degree of precision.
The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.
The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.
This kit includes 10 FP04-F1 type plastic components, compatible with Dynamixel servomotors of the AX-range.
ALF-M101 is a mounting plate compatible with the DYNAMIXEL aluminium profiles.
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
5 cables (15cm length) For 3P-5P conversion
This pack of four 5P cables (150 mm) from Robotis makes it easy to connect your robot sensors.
This heavy duty 3-pin ribbon cable is compatible with the Dynamixel AX and MX actuators.
Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 160 mm Cables for XL Servos.
Choose quality cables for powering your Dynamixel XL servos tailored to your projects’ needs by opting for this pack of five 3P 130 mm Cables for XL Servos.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.