Horn for Dynamixel actuator RX-64 N1 and EX-106+
Fixation frame set for the Dynamixel EX-106+ actuator
Fixation frame for Dynamixel actuators compatible with RX-24F (N101 type), RX-28 (N101 type) and MX-28 smart actuators.
Mounting plate for Dynamixel actuators RX24F, RX-28 and MX-28
Set with frame, horn and bearing for Dynamixel actuators
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
Two frames with bolt and screws for Dynamixel MX-64 actuator.
Mounting plate for Dynamixel actuators RX-64, EX-106+, MX-64 and MX-106
Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.
Kit containing horn, frame and bearing for Dynamixel actuators
Need a remote to control your Robotis robotics kit? The RC-100B Remote Control offers you up to 1,023 different command combinations and 3 different communication protocols!
The SMPS2Dynamixel allows you to power your Dynamixel servomotors if you don't use a controller.
The PS-10 SMPS charger allows you to power your Dynamixel controllers and servomotors.
Horn and bearing set compatible with RX-64 (N101 type), EX-106+, MX-64 and MX-106 Dynamixel actuators.
Horn and Bearing HN05-I1 for Dynamixel actuators
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
The LBC-010 charger for LiPo battery allows to recharge the LBS-10 LiPo battery of the Premium Bioloid kit.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.