The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
Use the proper bolts for fixing your Dynamixel servos!
The Dynamixel FR13-S101K structural components enable you to mount a side frame onto your Dynamixel X540 servo motor.
The ICT-01 component for TurtleBot3 allows you to replace the used caterpillar parts of your robot quickly and easily. Here you go again!
FRP42-A110K frame in aluminium for the Dynamixel Pro servomotors.
1 piece of 900mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
To obtain the most innovative articulated robotics platforms, you need a talented designer (check!) and high-performance servos such as the XH430-W350-R, the latest creation of the Robotis team.
An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!
Whether it’s to replace your charger, have an extra charger, or just charge several batteries at once, this NAO battery charger will let you use your NAO programmable humanoid robot even longer! Compatible only with the new Nao V6 batteries
With this battery + charger pack, maximize your flight sessions and fully enjoy the performance of your Crazyflie 2.X!
The RealSense™ Depth Camera D456 is based on the technology of the D455 USB camera, offering an increased range thanks to its 3 sensors.
4 spare brushed motors for your mini Crazyflie 2.1+ flying platform.
If you’ve run out of mounts for assembling your beams, you’ll need this set of 12 MakerBeam brackets, compatible with OpenBeam and MakerBeamXL.
The CS-10 color sensor can detect up to 6 colors.
The FP04-F8 frames from Robotis are designed to adapt perfectly to the Dynamixel AX-series servo motors.
XH/XM series servos are equated with quasi-total control and durable, ergonomic design, and the Dynamixel XH540-V150-R servo motor is no exception to this rule.
Use this pack of five 3P-Sync 160 mm cables for connecting two Dynamixel MX-106 and X540 servos in master/slave mode.
These 4 x 120 mm 4P cables (for wireless module) are intended exclusively for connecting your Dynamixel servo motors using the RS485 protocol.
The Dynamixel XH430-W210-T servo belongs to the high performance range of Robotis actuators with a TTL interface. You won’t get enough of it!
Bag of 4 knurled nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL
Pack of 6 Dynamixel MX-28T servomotors
5 cables (15cm length) For 3P-5P conversion
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.