The Dynamixel XM540-W150-T servo motor with a TTL interface belongs to the vast Dynamixel range of fully programmable, reliable, powerful and fast actuators, intended for the most meticulous robotics engineers.
Kit for Poppy Humanoid robot with Raspberry electronics. This kit contains all the elements (Dynamixel actuators, electronics, connectors, ...) to assemble Poppy. The 3D parts are not included in this kit.
The Base Plate-02 for OpenManipulator is used for fixing your TurtleBot3 accessory securely on a flat surface.
The right Mecanum wheel from Nexus Robotics Ltd is comprised of 12 nylon rollers mounted on two aluminium plates. They provide a full freedom of movement to your mobile robot.
The left Mecanum wheel combines solid aluminium alloy and nylon for a smooth motion of your mobile platform.
Discover the advanced features of the Dynamixel actuators in the MX series with this pack of 6 Dynamixel MX-28AR servo motors. You’ll benefit from a better resistance to overheating, a better control of position and faster communication, among other advantages!
This pack of 6 Dynamixel MX-28R servo motors is just the right choice for conceiving a mobile robot or any other project drawing on Dynamixel’s expertise: a servo including a gear system, a driver and a controller. The MX-28R is an efficiently designed servo with high performance actuators and communicating via an RS485 interface.
1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
8 pieces of 40mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
The CM-150 Controller is used for programming robotics kits like the Robotis Dream Level 2. It will allow you to connect numerous components, for example sensors, gearmotors and LED modules.
Pack of 6 Dynamixel MX-64AR servomotors
A behaviour to install on your NAO robot so it will greet members of the public and carry out presentations you have designed. This behaviour is ideal for any organisation that has to receive members of the public and wants to stand out from the others as regards its innovation and technology capacity. The NAO robot attracts the public and performs interactive presentations that can include images, sounds, video, and quizzes.
So you thought it was impossible for a device to be even more powerful than the UST-10XL without sacrificing size? Well take a look at the Hokuyo UST-20LX Scanning Laser Range Finder: just as light, just as sturdy – but with much sharper vision!
This hard case with wheels is designed for the transport and storage of the NAO robot, with particular attention to protection and handling.
Pack of 6 Dynamixel MX-64T actuators without any accessories
The most popular laser range finder from Hokuyo. Thousands of robots accross the world use this sensor recognised for its accuracy and its robustness.
Ready to launch your own amphibious vehicle? Dynamixel has released a series of waterproof servo motors, including the XW430-T333-R, for roboticists impressed by 20,000 Leagues Under the Sea.
The Dynamixel XW430-T200-R actuator with RS485 connection combines a 100% waterproof device with a medium torque, allowing for some speed if required.
The ZED 2i Depth Camera, replacing the ZED 2, comes with a new design, secure connectivity and new lens options. The ZED 2i by Stereolabs is an extremely powerful tool for all your vision-based robotics projects.
The Dynamixel XW540-T140-R servo motor from Robotis expands an already large family of high-definition servo motors. What's special about this servo motor? Its water resistance which allows it to equip amphibious platforms and mobile bases 100% off-road.
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
Discover the Dynamixel XH540-W150 servo motor in a TTL version. In short, an all-in-one, fully programmable actuator, designed for robotics enthusiasts looking for a reliable and durable servo.
These 6 Robotis FP04-F5 structural components fit the Bioloid robotics kits and are exclusively compatible with Dynamixel AX-series servos.
This linear slide rail wil help you to build straight and sturdy MakerBeam constructions. Linear slide rail dimansions: 300mm x 9mm x 6,5mm, carriage dimensions: 29mm x 20mm x 8mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL