The left Mecanum wheel combines solid aluminium alloy and nylon for a smooth motion of your mobile platform.

This 5-pin cable designed for the UM7, the small module from Redshift Labs, is available in one-way and two-way versions!

Discover the advanced features of the Dynamixel actuators in the MX series with this pack of 6 Dynamixel MX-28AR servo motors. You’ll benefit from a better resistance to overheating, a better control of position and faster communication, among other advantages!

This pack of 6 Dynamixel MX-28R servo motors is just the right choice for conceiving a mobile robot or any other project drawing on Dynamixel’s expertise: a servo including a gear system, a driver and a controller. The MX-28R is an efficiently designed servo with high performance actuators and communicating via an RS485 interface.

Bag of 50 cap nuts and their washers for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

1 piece of 1500mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

8 pieces of 40mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.

The CM-150 Controller is used for programming robotics kits like the Robotis Dream Level 2. It will allow you to connect numerous components, for example sensors, gearmotors and LED modules.

So you thought it was impossible for a device to be even more powerful than the UST-10XL without sacrificing size? Well take a look at the Hokuyo UST-20LX Scanning Laser Range Finder: just as light, just as sturdy – but with much sharper vision!

The transport case for humanoid NAO robot provides a safe and easy transportation to take it wherever you go.

Pack of 6 Dynamixel MX-64T actuators without any accessories

The most popular laser range finder from Hokuyo. Thousands of robots accross the world use this sensor recognised for its accuracy and its robustness.

The YDLidar GS2 is both compact and lightweight, it has a field of view of 100° and a range of 30 cm. It can be integrated easily into small smart devices.

The YDLIDAR X2 360° is a highly compact, energy-efficient laser range finder that offers omni-directional scanning. Ideal for embedded robotics.

The Dynamixel XW430-T200-R actuator with RS485 connection combines a 100% waterproof device with a medium torque, allowing for some speed if required.

The Dynamixel XW540-T140-R servo motor from Robotis expands an already large family of high-definition servo motors. What's special about this servo motor? Its water resistance which allows it to equip amphibious platforms and mobile bases 100% off-road.

The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!

Discover the Dynamixel XH540-W150 servo motor in a TTL version. In short, an all-in-one, fully programmable actuator, designed for robotics enthusiasts looking for a reliable and durable servo.

Kit for Poppy Humanoid robot with Raspberry electronics. This kit contains all the elements (Dynamixel actuators, electronics, connectors, ...) to assemble Poppy. The 3D parts are not included in this kit.

These 6 Robotis FP04-F5 structural components fit the Bioloid robotics kits and are exclusively compatible with Dynamixel AX-series servos.

Discover a fully programmable, high precision and performance servo with the Dynamixel XH430-V210-R equipped with a 24V RS485 interface.

This linear slide rail wil help you to build straight and sturdy MakerBeam constructions. Linear slide rail dimansions: 300mm x 9mm x 6,5mm, carriage dimensions: 29mm x 20mm x 8mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL

This micro stepper motor bracket is a 3D printed bracket designed for MakerBeam. It also incudes 2 M3 bolts 6mm, 2 M3 bolts 12mm and 4 nuts.
Check out our MakerBeam brackets range. Compatibility: MakerBeam

This flat micro stepper motor bracket is designed in lasercut opaque perspex. It includes 4 M3 bolts 6mm and 4 nuts.
Check out our MakerBeam brackets range. Compatibility: MakerBeam