The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The DYD (DYNAMIXEL Drive) is a high-precision gear known for its exceptional impact resistance.
Supplier Reference: 902-0164-000
DYNAMIXEL TRAINING (DYD) is a high-precision gear with superior shock resistance.
Supplier Reference: 902-0165-000
The DYD-15-051 high-precision gear is a cycloid-based reducer designed to offer optimum strength and robustness throughout its 5,000 hours of use.
Dynamixel Drive DYD for Dynamixel-P servomotor is a high-precision Robotis gear that is ideal for its superior impact resistance.
use this PCB connector to extend your constructions based on Dynamixel actuators
The Dynamixel communication bridge is designed to convert the RS485 or TTL signals from your servo motors into a single signal for analysis on your computer.
The Dynamixel shield for Arduino from Robotis can be used to control yourDynamixel servo motors using your Arduino board or an OpenCR controller.
The DYNAMIXEL MKR shield is an extension board that plugs into the popular Arduino MKR.
This EPX430-BR101 kit is an enhanced extension for the X430, offering optimum performance and even greater accuracy.
With the FR04-G101GM set from Robotis, you’ll get the same gripper frames as the ones used for the GP robot.
FP04-F11 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).
FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).
FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section). This part can be used as a wheel when connected to a AX-12A servomotor.
In this set, you’ll find 10 sturdy plastic structural components for Dynamixel AX servo motors, suitable for replacing components in Bioloid robots.
FP04-F18 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).
Robotis put together this pack of 20 FP04-F55 Dynamixel Cable Holders to more efficiently organise Bioloid robot cables.
You can use this set of structural components for Dynamixel XL330 servos to add a joint to your robotics project.
A set of 4 frames compatible with the X330 servo motor to make it easier for you to mount your servo in your robotics project.
The FPX330-S102 set contains all the parts you need to mount and attach your Dynamixel X330 servo.
Support set for RX-64, EX-106+, MX-64 and MX-106 Dynamixel servomotors