Pololu's m3pi and Zumo mobile robots and their many accessories will delight robotics and electronics engineers, both beginners and advanced users. Programmable in C, you will find online some comprehensive documentation that will allow you to quickly take your first steps with these robots.
There are 20 products.
This digital infrared proximity sensor from Pololu detects objects between 0.5 and 5 cm. Its main characteristics are a quick response time, a small size, low current draw and a compact carrier PCB that makes it easy to integrate into your project.
This digital infrared proximity sensor from Pololu detects objects between 2 and 10 cm. Its main characteristics are a quick response time, a small size, low current draw and a compact carrier PCB that makes it easy to integrate into your project.
The JRK 12v12 motor controller with feedback allow you to command a middle size brushed DC motor with one of the four available interfaces: USB, analog voltage, digital command or radio command. You can also enslave the motor in closed-loop.
This Optical Encoder Pair Kit for Micro Metal Gearmotors is designed for fitting to the rear of Polulu micro metal gearmotors with extended back shafts. You also get two pairs of toothed wheels in different dimensions, so you can choose your resolution.
This dual motor driver from Pololu is based on Freescale’s MC33926 full H-bridge. It has a 5 – 28V operating range and can deliver almost 3A continuously (5A peak) to each of its two motor channels. The dual motor driver works with 3 – 5V logic levels, supports up to 20kHz PWM and has many protections.
This Infrared Reflectance Sensor Array comprises a QTR-8RC line sensor module, which can also be used to detect objects or reflective surfaces. It is ideal for making your mobile robots truly smart and independent, or for any other project requiring this type of measurement.
The mbed NXP LPC1768 is an easy-to-use MCU development board designed for rapid prototyping. At its heart is a powerful 32-bit ARM Cortex-M3 processor. A comprehensive firmware library and plenty of sample code help you get your program up and running quickly.
This tiny dual motor driver from Pololu carries a TI DRV8833 dual H-bridge. Supplyied with a 2.7 - 10.8 V voltage, it can deliver 1.2A (2A peak) to two DC motors. It integrates protections against reverse-voltage, under-voltage, over-current, and over-temperature.