The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
The CM-150 Controller is used for programming robotics kits like the Robotis Dream Level 2. It will allow you to connect numerous components, for example sensors, gearmotors and LED modules.
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.
The DMS-80 distance sensor offers to your Bioloid or Dynamixel mobile robots to measure distances and therefore to detect obstacles.
The DYD (DYNAMIXEL Drive) is a high-precision gear known for its exceptional impact resistance.
Supplier Reference: 902-0164-000
DYNAMIXEL TRAINING (DYD) is a high-precision gear with superior shock resistance.
Supplier Reference: 902-0165-000
The DYD-15-051 high-precision gear is a cycloid-based reducer designed to offer optimum strength and robustness throughout its 5,000 hours of use.
Dynamixel Drive DYD for Dynamixel-P servomotor is a high-precision Robotis gear that is ideal for its superior impact resistance.
Dynamixel is back with a groundbreaking model, the 2XC430-W250-T. A single Dynamixel servomotor to drive two axes. Two degrees of freedom for a single servomotor!
The Dynamixel 2XL430-W250-T servo motor can control two axes, for robotics creations with more complex joints. It is compatible with the XL430, XM430 and XH430 models.
use this PCB connector to extend your constructions based on Dynamixel actuators
Pack of 6 Dynamixel AX-12A actuators (without any accessories)
The Dynamixel AX-12A is the entry-level actuator from Robotis. Its low cost makes it a best seller for all non-essential mechanical functions of your robot.
The fastest actuator for positionning of the AX range
The fastest actuator for positionning of the AX range
The Dynamixel communication bridge is designed to convert the RS485 or TTL signals from your servo motors into a single signal for analysis on your computer.
The MX-106R is a Dynamixel servomotor, with high-level control features and very precise. It is by far the most powerful of the Dynamixel servomotors.
The MX-106T is a Dynamixel servomotor, with high-level control features and very precise. It is by far the most powerful of the Dynamixel servomotors.
The MX-28R is a Dynamixel servomotor, with high-level control features and very precise. This model is an improvement upon the MX-28R model, with an aluminium body allowing a better heat distribution, and a new fastening system.
Pack of 6 Dynamixel MX-28AT actuators without any accessories
The MX-28R is a Dynamixel servomotor, with high-level control features and very precise.