Sabertooth 2x32 is a dual channel motor driver capable of supplying 32A to two motors–with peak currents up to 64A. It can be operated from radio control, analogue, TTL serial or USB inputs. It uses regenerative drive and will boost your robot!
Let your Sabertooth control and supply two DC motors, a microcontroller and a couple of servos, and your robot will reach new highs in manoeuvrability and autonomy!
Probably one of the best drivers in its class – the Sabertooth 2x 25 A Motor Driver is powerful, versatile, extremely reliable and allows you to control 2 motors at once while recharging your supply batteries!
Use the proper bolts for fixing your Dynamixel servos!
A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.
Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
This professional version of the RoboRun+ licence makes it easier to configure and program the Roboteq motor controllers.
Need a remote to control your Robotis robotics kit? The RC-100B Remote Control offers you up to 1,023 different command combinations and 3 different communication protocols!
Available exclusively at Génération Robots, the Pixl board was made for using Dynamixel XL-320 motors on a Raspberry Pi designed for the Poppy Ergo Jr educational robot. Not compatible with Raspberry Pi 3B+.
More accurate, faster, easier to control and supporting RS-485 communication, these 6 Dynamixel MX-64R servos are both powerful and flexible.
This pack of 6 Dynamixel MX-28R servo motors is just the right choice for conceiving a mobile robot or any other project drawing on Dynamixel’s expertise: a servo including a gear system, a driver and a controller. The MX-28R is an efficiently designed servo with high performance actuators and communicating via an RS485 interface.
Discover the advanced features of the Dynamixel actuators in the MX series with this pack of 6 Dynamixel MX-28AR servo motors. You’ll benefit from a better resistance to overheating, a better control of position and faster communication, among other advantages!
The most powerful servo in the MX series reinvents itself in a pack of 6 Dynamixel MX-106T servo motors supporting TTL communication. Let’s go for more ambitious projects!
This pack contains 6 Dynamixel MX-106R actuators without accessories (screws, horn or cables) that can be purchased on this web site.
The 902-0044-001 pack contains 6 smart serial Dynamixel AX-18A Servos, an excellent low-end servo more powerful than the Dynamixel AX-12A.
Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!
One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!
An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!
The OpenRB-150 is a next-generation, open-source, Arduino compatible embedded controller.
This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!
The OpenCM 485 Expansion Board connects to your OpenCM9.04 Controller so you can benefit from additional Dynamixel ports.
You can now power, connect and program all your Dynamixel servos, whatever the model, thanks to this official and very clever Dynamixel starter set.
This bracket set for Dynamixel MX-64 or MX-106 servos is great for creating a new joint on your robotics project.