The Ranger 4WS4WD Robot features a four-wheel drive and steering configuration, allowing it to traverse rugged terrain and uneven surfaces easily.
The AgileX Ranger Mini 3.0 is a mobile robot with an omni-directional drive-by-wire chassis and multiple movement options. It can handle a wide variety of indoor and outdoor tasks.
The Doosan Robotics H2515 robot arm is designed to improve palletisation operations. With its 1500 mm reach, 0.1 mm repeatability and a payload that can reach 25 kg, you can use it to easily move the items you need to automate part of your process.
With its 5 kg payload and 900 mm reach, the A0509 collaborative robot offers a speed and acceleration faster than the industry standard. It’s ideal for simple pick and place, boxing and line loading operations.
FR3 is a collaborative robot arm with 7 DOF, developed by FRANKA ROBOTICS. The robot designed for research and R&D allows its user to have a direct control and the possibility to program the robot, but also interface the robot with external sensors (ROS, ROS2, MoveIt! and Matlab packages available online).
The LIMO simulation table tests the LIMO robot’s ability to navigate independently and analyse signals found on its journey.
Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!
Want to install an SD card reader on your flying Crazyflie 2.1 robotic platform to read or record data in flight?
The active marker deck accessory is designed for the Crazyflie family, and includes the Qualisys QTM motion capture system.
Use this colour camera module to install a new image capture system for your Crazyflie 2.1 mini-drone.
This Crazyradio 2.0 2.4 GHz module lets you communicate with the Crazyflie robotic platform from a distance of over 1 km.
4 spare brushed motors for your mini Crazyflie 2.1+ flying platform.
47 mm propellers for Crazyflie 2.1+ improve flight performance, with longer flight time and up to 15% more thrust.
Be prepared for all eventualities thanks to these Crazyflie 2.1+ motor mounts. What would you do without them?!
The Crazyflie 2.X LED-ring expansion board will illuminate each of your creations with 12 RGB and 2 white strong LEDs.
The Hunter SE robotics chassis, designed for speed and distance, is the ultimate exploration robot.
The development kit for AGVs and AMRs based on SWD Safety Wheel Drive technology provides a ready-to-use platform for designing, testing and validating autonomous mobile robots in research, academic or industrial environments.
The AgileX Bunker Mini 2.0 tracked mobile robot is a small UGV that performs well on all terrains.
The Omnivision extension for the e-puck 2 robot is a colour camera with panoramic vision that you can connect directly to the robot’s microcontroller or to its Pi-Puck extension.
The University of York robotics lab has designed a new extension for its e-puck 2 robot, for installing a Raspberry Pi Zero W (rPi) microcontroller. More efficient, and cheaper!
This programmable Crazyflie drone (ROS compatible) designed by Bitcraze has an exclusive embedded indoor positioning system, for an autonomous flight that’s as precise as when using a GPS!
Fly this swarm of 10 Crazyflie 2.1+ drones (ROS compatible) or teach them to fly autonomously with the Loco Positioning System!
/!\ Used robot /!\
Agile and vigilant on both indoor and outdoor missions, the Spot robot is not at all afraid of rough terrain or poor light. This Explorer Package includes batteries, a charger and carrying case!
Something’s happened to your battery charger or your Crazyflie 2.1+ drone LiPo battery? Don’t panic, these spare parts will come to your rescue!