With its 5 kg payload and 900 mm reach, the A0509 collaborative robot offers a speed and acceleration faster than the industry standard. It’s ideal for simple pick and place, boxing and line loading operations.

FR3 is a collaborative robot arm with 7 DOF, developed by FRANKA ROBOTICS. The robot designed for research and R&D allows its user to have a direct control and the possibility to program the robot, but also interface the robot with external sensors (ROS, ROS2, MoveIt! and Matlab packages available online).

The LIMO simulation table tests the LIMO robot’s ability to navigate independently and analyse signals found on its journey.

Make your DJI Tello drone’s flights less risky with this propeller guard set. It will protect both your device... and anyone it might hit!

Want to install an SD card reader on your flying Crazyflie 2.1 robotic platform to read or record data in flight?

The active marker deck accessory is designed for the Crazyflie family, and includes the Qualisys QTM motion capture system.

Use this colour camera module to install a new image capture system for your Crazyflie 2.1 mini-drone.

This Crazyradio 2.0 2.4 GHz module lets you communicate with the Crazyflie robotic platform from a distance of over 1 km.

4 spare brushed motors for your mini Crazyflie 2.1+ flying platform.

47 mm propellers for Crazyflie 2.1+ improve flight performance, with longer flight time and up to 15% more thrust.

Be prepared for all eventualities thanks to these Crazyflie 2.1+ motor mounts. What would you do without them?!

The Crazyflie 2.X LED-ring expansion board will illuminate each of your creations with 12 RGB and 2 white strong LEDs.

Niryo has also chosen to equip its Ned2 robot arm with a vision set, for colour object detection and recognition.

This Niryo Ned 2 compatible conveyor belt is a robot arm accessory you can use to design your next industrial production line or improve your robotics programming education.

This Niryo accessory enables the Ned2 6-axis robotic arm to lift and move objects with flat, smooth, non-porous surfaces that are too thin to be picked up by any other means

This adaptive gripper for the Niryo Ned2 6-axis robot arm adapts perfectly to handling of more complex objects: round items, pens, eggs, etc.

With this large gripper for the Niryo Ned2 6-axis robot arm, you can grab larger objects than with the custom gripper supplied.

You’ll find additional uses for your Niryo Ned2 6-axis robot arm thanks to this electromagnet, a tool designed to catch everything the other grippers won’t.

Ned2 is Niryo’s new 6-axis robot arm. It’s robust, can be customised and is suitable for many research, teaching and industrial development applications.

The Hunter SE robotics chassis, designed for speed and distance, is the ultimate exploration robot.

The development kit for AGVs and AMRs based on SWD Safety Wheel Drive technology provides a ready-to-use platform for designing, testing and validating autonomous mobile robots in research, academic or industrial environments.

The AgileX Bunker Mini 2.0 tracked mobile robot is a small UGV that performs well on all terrains.

The Omnivision extension for the e-puck 2 robot is a colour camera with panoramic vision that you can connect directly to the robot’s microcontroller or to its Pi-Puck extension.

The University of York robotics lab has designed a new extension for its e-puck 2 robot, for installing a Raspberry Pi Zero W (rPi) microcontroller. More efficient, and cheaper!