The Dynamixel FR13-S102K side frame kit can be assembled on the bottom side of your Dynamixel X540 servo motor.

The Dynamixel FR13-S101K structural components enable you to mount a side frame onto your Dynamixel X540 servo motor.

The Dynamixel FR13-H101K kit can be used to create an articulated frame for your Dynamixel X540 servo motor.

This new Dynamixel servo in the X series is a great addition to the family with its compact design, extensive feedback, various wiring options, and improved heat sink!

Pack of 10 TTL communication cables for the Dynamixel X-series servomotors.

This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!

The Dynamixel XM540-W150-R servo motor falls in the X family of Robotis servos: it’s scalable and offers no fewer than 6 operating modes for controlling your robot with millimetre accuracy.

The XL430-W250-T Dynamixel servo with a TTL interface falls in the family of “low cost” servo motors, but it still provides great flexibility of assembly and use, and a compact design for all your small creations.

Put the SyRen 50 motor driver to the test: up to 100A peak, 4 operating modes for controlling velocity or direction, and 100% safe.

The famous SyRen regenerative motor driver is returning in a 25A version: fully secured and highly versatile, it gives you extended control over your robot’s movements.

Program many Dynamixel servos directly with the U2D2 Dynamixel/PC connector, for AX/MX to pro series!

Let your Sabertooth control and supply two DC motors, a microcontroller and a couple of servos, and your robot will reach new highs in manoeuvrability and autonomy!

The Sabertooth 2x5 motor driver can supply two DC brushed motors with up to 5A each continuously. It’s the perfect solution for small robots!

The Sabertooth family is back with its most ambitious motor driver: 2 x 60A for controlling robots up to 450 kg with the necessary sensitivity!

Precision navigation, increased autonomy and varied operating modes: the SyRen 10 motor driver is one of the most efficient for medium-sized robots.

Want to control your motors and servos with greater freedom and precision? Dimension Engineering’s Kangaroo motion controller has everything to satisfy your needs: compatible with Sabertooth and SyRen, it allows you to control position and/or speed without skidding off the track.

Sabertooth 2x32 is a dual channel motor driver capable of supplying 32A to two motors–with peak currents up to 64A. It can be operated from radio control, analogue, TTL serial or USB inputs. It uses regenerative drive and will boost your robot!

FP04-F18 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section). This part can be used as a wheel when connected to a AX-12A servomotor.

FP04-F12 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

FP04-F11 frame for Bioloid kit. Compatible only with the AX-series Dynamixel servomotors. Bolts an nuts are not included (see the accessories section).

FRP54-I110K frame in aluminium for the Dynamixel Pro servomotors.

FRP54-A110K frame in aluminium for the Dynamixel Pro servomotors.

FRP42-I110K frame in aluminium for the Dynamixel Pro servomotors.