Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!
An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!
Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!
One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!
Replace the gears of your Dynamixel AX-12A smart actuator using this replacement kit.
This pack of five 3P 110 mm Cables for XL Servos has been specially designed for connecting your Dynamixel servos to compatible controllers.
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!
A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.
This set of 10 FP04-F3 side mounting frames is designed for the Bioloid robotics kits by Robotis that use the AX series Dynamixel servomotors.
Robotis put together this pack of 20 FP04-F55 Dynamixel Cable Holders to more efficiently organise Bioloid robot cables.
The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.
The Robotis Gear/Bearing Set for the MX-106 servo motor has been designed for the long-lasting replacement of your gear and bearing parts: robustness, endurance, and long life are the keywords here!
The 903-0205-000 gear/bearing set is the replacement kit to choose if you want to give your Dynamixel MX-64 servo motor a new lease of life.
The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.
This 3P Cable Set for Dynamixel servo motors in the AX and MX series lets you make all the standard connections between your robot and the various sensors and actuators that it needs.
In this set, you’ll find 10 sturdy plastic structural components for Dynamixel AX servo motors, suitable for replacing components in Bioloid robots.
Structural components for building a prehensile hand for the DARwin-OP humanoid robot
Make your OpenCM9.04-A control board for Dynamixel servomotors complete with this accessory set.
The USB2AX is a small interface to control Dynamixel servomotors like the AX-12 or the MX-28T from a computer.
5 cables (15cm length) For 3P-5P conversion
10 cables (14cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
10 cables (6cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.