The OpenRB-150 is a next-generation, open-source, Arduino compatible embedded controller.

This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!

The OpenCM 485 Expansion Board connects to your OpenCM9.04 Controller so you can benefit from additional Dynamixel ports.

You can now power, connect and program all your Dynamixel servos, whatever the model, thanks to this official and very clever Dynamixel starter set.

This bracket set for Dynamixel MX-64 or MX-106 servos is great for creating a new joint on your robotics project.

Incorporate MX-64 and MX-106 servos into your new Arbotix project!

The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!

The USB downloader LN-101 allows you to download your RoboPlus code into the CM-100, CM-510 and CM-700 main controllers.

The LBC-010 charger for LiPo battery allows to recharge the LBS-10 LiPo battery of the Premium Bioloid kit.

This 11V LiPo LBS-10 battery is intended for the Bioloid Premium kit. It is also compatible with the CM-510, CM-530, CM-700 and CM-900 controllers.

The IRSS-10 infrared sensor is a robotics accessory that allows a platform to discern colours and obstacles.

Horn and Bearing HN05-I1 for Dynamixel actuators

Make your robotics constructions even safer with this HNX540-C101 set for Dynamixel actuators, which includes a clamping horn.

The HNX430-I105 set includes a rudder, a frame, and a bracket, as well as the necessary bolts to secure the assembly. It is specifically designed to be compatible only with Dynamixel XW430 servomotors.

The HNX430-C101 set consists of a clamping horn and a complete set of screws to adapt to an XH430 or XM430 actuator.

Metal horn set for DYNAMIXEL XL330 and XC330 series.

The Dynamixel HN13-N101 horn set is designed to adapt to the output shafts on Dynamixel XH-series and XM540 servos.

This complete idler bearing set for X540 series includes all the necessary mounting screws.

HN12-N101 is the ideal horn set for making the most of the new Dynamixel X-series 430 smart servos. It’s study and a perfect fit!

The HN12-I101 Horn Set is the perfect fit for Dynamixel X-series 430 servos.

The HN11-I101 Horn Set is the perfect fit for Dynamixel XL430 servos.

Horn and bearing set for Dynamixel actuators compatible with the RX-24F, RX-28 and MX-28 actuators.

Horn and Bearing set for Dynamixel compatible with RX-24F and RX-28 actuators.

Horn and bearing set for Dynamixel actuators compatible with the Dynamixel RX-64 (N101 type) and EX-106+.