.

Communication

A robot must be able to communicate, either between its components, with other robots or remote computers. This category gathers all communication modules for your robot: standard radio protocols such as Xbee, Bluetooth, Wifi, standard wired communication module (USB, FTDI, RS232, CAN ...).

Active filters

This digital to analog converter receives a values from your microcontroller in I2C and transforms it into a corresponding analog voltage. This is very useful for audio or analog projects.

In Stock

Simply connect a CAN to your microcontroller and enjoy the extreme precision of the ADS1115 16-Bit ADC for all your conversions!

In Stock

The 2.4G Wireless Serial Module is the ideal accessory for use in classrooms when numerous groups need a WiFi connection to work on their project.

In Stock

Although tiny, the 433 MHz ISM WT-4432G Radio Transceiver Module will open doors to numerous Arduino electronics projects!

In Stock

This Arduino-compatible miniature development board embarks a fast and efficient WiFi module and an ATSAMD21G18 processor with plenty of memory space. It is thin, light, and lets you fly!

In Stock

The Adafruit Bluefruit Feather is a miniature development board that includes a BLE module, USB port, battery connector and enough memory to let your imagination go wild!

In Stock

This analog to digital converter is commanded in I2C and allows you to convert up to 4 independant analog inputs or two differential inputs. A programmable amplification up to x16 can be applied to the result.

In Stock

The BlueSMIRF Gold Bluetooth Modem is an easy way to add some Bluetooth connectivity to your mobile robot

In Stock

The Bluno is a microcontroller designed for projects integrating the Bluetooth 4.0 technology. It combines an Arduino Uno board and a Bluetooth 4.0 module (BLE) in a single piece of hardware.

In Stock

The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.

In Stock

When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.

In Stock
€35.30

The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.

In Stock

The EM-406 Connector Breakout allows you to connect the wires of compatible GPS modules to easily develop your microcontroller.

In Stock

No more ethernet cable needed with this WiFi dongle! With the EW-7811 Edimax nano key, you can easily connect your Raspberry Pi to internet. What's more, it's compact and perfectly compatible with the Raspberry Pi!

Out-of-Stock

The Feather Huzzah is a small board embedding WiFi and USB connectivity options, that you can program on Arduino or with Lua. A big thank you to the Adafruit team!

In Stock

This very easy to use module based on the HC-05 Bluetooth XBee Chip is compatible with all XBee sockets.

In Stock

You’re going to need an RFID reader if you want to start working on non-contact ID projects, and the ID-20LA module by ID Innovations is an extremely simple one to use. Perfect for beginners!

In Stock
€19.71 €21.90 -10%

The Makeblock-Me USB Host v1 allows you to easily connect your Makeblock board to a USB device.

In Stock

The Me Bluetooth Module v1 (dual mode) is a small Bluetooth 2.0 and 4.0 compatible module you can use on all your iOS and Android devices.

In Stock

Use this Me RJ25 Adapter Module to increase the connection possibilities of your Makeblock Me base board.

In Stock

The Me WiFi Module v1 allows long-distance communication with a PC or smartphone, for controlling all your Makeblock creations.

In Stock

The MIFARE SM130 RFID Module by SparkFun is a 28-pin DIP module that provides easy access to the 13.56 MHz RFID technology on Arduino.

In Stock

This mini-USB to serial FTDI module can be installed on your 3.3V Arduino boards without a USB connector and will equip your Arduino with the very clever auto-reset function!

In Stock