.

Communication

A robot must be able to communicate, either between its components, with other robots or remote computers. This category gathers all communication modules for your robot: standard radio protocols such as Xbee, Bluetooth, Wifi, standard wired communication module (USB, FTDI, RS232, CAN ...).

Active filters

This WRL-12571 XBee WiFi Module with Wire Antenna strikes an ideal balance between the simple software and hardware associated with the XBee modules and the Digi WiFi communication technology.

In Stock

Offering a long range and low power consumption, the XBee Pro 60 mW PCB Antenna - Series 1 by SparkFun will solve all your inter-device communication problems!

In Stock

The SparkFun XBee Explorer Regulated board is the ideal interface for connecting your XBee modules and your microcontroller, whether 3.3V or 5V compatible.

In Stock

This small module could well revolutionise the world of the IoT, and change the lives of its fans. The ESP8266 WiFi module has its own TCP/IP protocol for direct WiFi access, plus it has its own 32-bit processor!

In Stock

This Wifi module connects to Raspberry Pi through USB and brings it a Wifi connection.

In Stock

Offering 4 MB flash memory and an integrated TCP/IP protocol, this WiFi module will let you work on an Internet of Things project without breaking the bank.

In Stock

The WRL-11713 WiFi Dongle is the most efficient solution for equipping your pcDuino with a WiFi connection. And, even better, it also works with Raspberry Pi and BeagleBone Black!

In Stock

Want to control and optimise your data rate without using UART? Get the CC3000 WiFi module and its dedicated WiFi Breakout Board and you can integrate the Internet into your projects!

In Stock

Ordered in packs, this White PVC RFID Tag can be customised to go with whatever you wish. Choose your own shape and design for a made-to-measure RFID tag!

In Stock

FTDI basic board that is a USB/Serial converter

In Stock

If you want to establish a communication between your computer’s USB port and your Arduino board, transmit data between these two components and even upload code, the USB-to-UART 5V/3V3 Adapter is just what you need!

In Stock

Add the Bluetooth functionality to your computer thanks to the Bluno dongle TEL0087 (BLE). This module can be used as a receiver or a transmitter.

In Stock

This USB Audio Adapter, built around the CM108AH chipset, is equipped with 2 jacks and will adapt to all projects on ODROID.

In Stock

This SparkFun XBee Explorer USB Board includes a FT231X converter for programming your XBee module directly from your computer.

In Stock

Check out the new Bluetooth breakout board by SparkFun, specially designed for Bluetooth Low Energy 4.0. Compatible with Arduino and Arduino Pro, the board is equipped with the BC118 Bluetooth BLE 4.0 module.

In Stock

With this RFID Evaluation Shield you can connect the SM130 RFID module to your Arduino without any painful welding. Things are always simpler with XBee!

In Stock

The Seeed Studio BLE Shield will allow you to incorporate the Bluetooth Low Energy technology into all your low-speed data transmission projects.

In Stock

The RS-485 Breakout Board is equipped with a SP3485 RS-485 transceiver and a filter capacitor for rapidly transmitting your UART data.

In Stock
€25.90

A great little module for RFID fans, the RFID USB Reader will open up new possibilities for RFID-compatible scanners. Including the ability to download the information stored on an RFID card by USB!

In Stock
€1.30

The Qwiic Adapter provides the perfect means to make any I2C board into a Qwiic-enabled board.

In Stock

The Programmable Wireless USB Wixel Module is a general-purpose programmable module providing integrated 2.4 GHz wireless communication and full-speed USB interface.

In Stock

This USB to serial adapter will enable communication between your computer and your microcontroller.

In Stock

Programmer for microcontrollers based on AVR technology. This programmer has been specificaly designed to program 3pi and m3pi robots from Pololu.

In Stock