.

Communication

A robot must be able to communicate, either between its components, with other robots or remote computers. This category gathers all communication modules for your robot: standard radio protocols such as Xbee, Bluetooth, Wifi, standard wired communication module (USB, FTDI, RS232, CAN ...).

Active filters

Ordered in packs, this White PVC RFID Tag can be customised to go with whatever you wish. Choose your own shape and design for a made-to-measure RFID tag!

In Stock

The Programmable Wireless USB Wixel Module is a general-purpose programmable module providing integrated 2.4 GHz wireless communication and full-speed USB interface.

In Stock

This digital to analog converter receives a values from your microcontroller in I2C and transforms it into a corresponding analog voltage. This is very useful for audio or analog projects.

In Stock

This analog to digital converter is commanded in I2C and allows you to convert up to 4 independant analog inputs or two differential inputs. A programmable amplification up to x16 can be applied to the result.

In Stock

This Wifi module connects to Raspberry Pi through USB and brings it a Wifi connection.

In Stock

Programmer for microcontrollers based on AVR technology. This programmer has been specificaly designed to program 3pi and m3pi robots from Pololu.

In Stock

No more ethernet cable needed with this WiFi dongle! With the EW-7811 Edimax nano key, you can easily connect your Raspberry Pi to internet. What's more, it's compact and perfectly compatible with the Raspberry Pi!

Out-of-Stock

This small module could well revolutionise the world of the IoT, and change the lives of its fans. The ESP8266 WiFi module has its own TCP/IP protocol for direct WiFi access, plus it has its own 32-bit processor!

In Stock

Use this Me RJ25 Adapter Module to increase the connection possibilities of your Makeblock Me base board.

In Stock

When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.

In Stock

Simply connect a CAN to your microcontroller and enjoy the extreme precision of the ADS1115 16-Bit ADC for all your conversions!

In Stock

Add the Bluetooth functionality to your computer thanks to the Bluno dongle TEL0087 (BLE). This module can be used as a receiver or a transmitter.

In Stock

The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.

In Stock

This mini-USB to serial FTDI module can be installed on your 3.3V Arduino boards without a USB connector and will equip your Arduino with the very clever auto-reset function!

In Stock

If you want to establish a communication between your computer’s USB port and your Arduino board, transmit data between these two components and even upload code, the USB-to-UART 5V/3V3 Adapter is just what you need!

In Stock

FTDI basic board that is a USB/Serial converter

In Stock

Although tiny, the 433 MHz ISM WT-4432G Radio Transceiver Module will open doors to numerous Arduino electronics projects!

In Stock

The SparkFun XBee Explorer Regulated board is the ideal interface for connecting your XBee modules and your microcontroller, whether 3.3V or 5V compatible.

In Stock

The RS-485 Breakout Board is equipped with a SP3485 RS-485 transceiver and a filter capacitor for rapidly transmitting your UART data.

In Stock

This SparkFun XBee Explorer USB Board includes a FT231X converter for programming your XBee module directly from your computer.

In Stock

The Seeed Studio BLE Shield will allow you to incorporate the Bluetooth Low Energy technology into all your low-speed data transmission projects.

In Stock

Have you plans to create a project incorporating the NFC or RFID technology? Then you’ll probably find this NFC/RFID module, based on the PN352 chip, extremely useful. The chip is already found in lots of mainstream devices using near field communication, or NFC.

In Stock

The Bluno is a microcontroller designed for projects integrating the Bluetooth 4.0 technology. It combines an Arduino Uno board and a Bluetooth 4.0 module (BLE) in a single piece of hardware.

In Stock

This USB to serial adapter will enable communication between your computer and your microcontroller.

In Stock