Radio modules

This WRL-12571 XBee WiFi Module with Wire Antenna strikes an ideal balance between the simple software and hardware associated with the XBee modules and the Digi WiFi communication technology.

Have you plans to create a project incorporating the NFC or RFID technology? Then you’ll probably find this NFC/RFID module, based on the PN352 chip, extremely useful. The chip is already found in lots of mainstream devices using near field communication, or NFC.

The BT-410 set includes a master module and a slave module for transmitting data over a Bluetooth BLE connection, for instance between a robot and an RC-100B type wireless controller.

Opt for a maximum range with this tiny XBee 3 Pro module with PCB antenna!

This Arduino-compatible miniature development board embarks a fast and efficient WiFi module and an ATSAMD21G18 processor with plenty of memory space. It is thin, light, and lets you fly!

The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.

This SparkFun XBee Explorer USB Board includes a FT231X converter for programming your XBee module directly from your computer.

The Adafruit Bluefruit Feather is a miniature development board that includes a BLE module, USB port, battery connector and enough memory to let your imagination go wild!

First came the XBee 1 and 2 modules, and now we have this new series of modules with PCB antennas offering a host of features to open up more communication options.

The Seeed Studio BLE Shield will allow you to incorporate the Bluetooth Low Energy technology into all your low-speed data transmission projects.

Check out the new Bluetooth breakout board by SparkFun, specially designed for Bluetooth Low Energy 4.0. Compatible with Arduino and Arduino Pro, the board is equipped with the BC118 Bluetooth BLE 4.0 module.

This Wifi module connects to Raspberry Pi through USB and brings it a Wifi connection.

The WRL-11713 WiFi Dongle is the most efficient solution for equipping your pcDuino with a WiFi connection. And, even better, it also works with Raspberry Pi and BeagleBone Black!

When connected to a robot, this Robotis Bluetooth module allows a tablet or smartphone to control the robot using the Bluetooth Low Energy (BLE) 4.0 protocol.

The Feather Huzzah is a small board embedding WiFi and USB connectivity options, that you can program on Arduino or with Lua. A big thank you to the Adafruit team!

This very easy to use module based on the HC-05 Bluetooth XBee Chip is compatible with all XBee sockets.

The Programmable Wireless USB Wixel Module is a general-purpose programmable module providing integrated 2.4 GHz wireless communication and full-speed USB interface.

The Me WiFi Module v1 allows long-distance communication with a PC or smartphone, for controlling all your Makeblock creations.

The SparkFun XBee Explorer Regulated board is the ideal interface for connecting your XBee modules and your microcontroller, whether 3.3V or 5V compatible.

No more ethernet cable needed with this WiFi dongle! With the EW-7811Un V2 Edimax nano key, you can easily connect your Raspberry Pi to internet. What's more, it's compact and perfectly compatible with the Raspberry Pi!

Although tiny, the 433 MHz ISM WT-4432G Radio Transceiver Module will open doors to numerous Arduino electronics projects!

This small module could well revolutionise the world of the IoT, and change the lives of its fans. The ESP8266 WiFi module has its own TCP/IP protocol for direct WiFi access, plus it has its own 32-bit processor!

Offering 4 MB flash memory and an integrated TCP/IP protocol, this WiFi module will let you work on an Internet of Things project without breaking the bank.