GPS Shield for Arduino
GPS Shield for Arduino
GPS Shield for Arduino

GPS Shield for Arduino

Dexter Industries | A-000000-00141
GPS Shield for Arduino UNO, Duemilanove, Leonardo and Mega boards
End of life product
Get a quote online

Size Chart
Size Chart

The GPS Shield for Arduino board

This GPS shield is provided fully assembled and does not require antenna to work. This GPS Shield is compatible with Arduino UNO, Duemilanove, Leonardo and Mega boards. This GPS Shield uses the SUP500F receiver from Skytraq. This GPS receiver has 65 channels at 10hz and a smart embedded antenna. A serial 3V LVTTL interface is available.

This Arduino shield has been designed by Dexter Industries.

Technical specifications of this GPS shield for Arduino

  • Receiver Type: L1 C/A code, 65-channel Venus 6 engine.
  • Accuracy
    • Position: 2.5m CEP
    • Velocity: 0.1m/sec
    • Time: 60ns
  • Startup Time:
    • 1 second hot start under open sky
    • 29 second cold start under open sky (average)
    • Reacquisition: 1s
    • Sensitivity: -161dBm tracking
  • Update Rate: Supports 1 / 2 / 4 / 5 / 8 / 10 Hz update rate (1Hz default)
  • Dynamics: 4G (39.2m/sec2)
  • Operational Limits: Altitude < 18,000m or velocity < 515m/s
  • Serial Interface: 3V LVTTL level
  • Protocol: NMEA-0183 V3.01 GPGGA, GPGLL, GPGSA, GPGSV, GPRMC, GPVTG*1 9600 baud, 8, N, 1
  • Datum Default: WGS-84
  • Input Voltage: 3.0V ~ 5.5V DC
  • Input Current: ~33mA tracking
  • Operating Temp: -40°C ~ +85°C
  • Storage Temp: -55 ~ +100oC
  • Humidity: 5% ~ 95%

Examples of codes for tyhe GPS Shield for Arduino

Click on the following links to obtain code examples:

Customers who viewed this item also viewed