XM430-W350-R Dynamixel servomotor

XM430-W350-R Dynamixel servomotor

XM430-W350-R Dynamixel servomotor
Robotis | A-000000-02351
331.43 €
20 perc. French VAT inc.

Including €0.01 for ecotax

We first presented the new XM430 series by Dynamixel to you when it was in beta testing. The XM430-W350-R servo motor is now available for sale, and its new features won’t disappoint!

8 Available

Get it in 24/48h! (see T&C)

Size Chart
Size Chart
Payment methods (see T&C)
Debit card
Payment by invoice
Wire transfer

XM430-W350-R servo: greater control of speed, trajectory, torque...

…and more! The new range of Dynamixel servos includes exciting new features for robotics enthusiasts:

  • Torque control: one of the major advantages of the XM430 range. It uses the current measurement to obtain a continuous flow of desired power.
  • PWM control: Dynamixel has opened its doors to PWM, which is excellent news for fans of radio-controlled vehicles because torque and output speed can be controlled more effectively on mobile robots.
  • Trajectory control: four types of trajectory are now possible thanks to the addition of acceleration and speed profiles. By controlling these two parameters, you can add an “effect” to your robot’s movement.
  • Current-based position control: position control and torque control can be combined to refine your robot’s movements.
  • Velocity and position controls: no surprise here, these were already a feature of the previous Robotis servo motors.
  • Possibility to plug the cable at the back, thus reducing any pinching or wearing risks.


As you can see, this new robot servo has what it takes to satisfy not only fans of radio-controlled wheeled vehicles but also fans of articulated robots with arms, hands and claws.

Dynamixel XM430-W350-R actuator

Dynamixel XM430 servo: a new-generation MX-28

Although the Dynamixel servos in the XM430 series prove slightly less powerful than the MX-106 servos, they are nonetheless an appreciable improvement on the MX-28 series.

They are more powerful and faster, and above all much more energy efficient at 40 mA compared with 100 mA for their predecessors. You will significantly increase your robot’s autonomy. It’s worth noting that the power supply equipment is the same for the XM430 as for the MX-28.

In terms of ergonomics, the XM430-W350-R servo is slightly more compact than the MX-28. The new design also offers a little plus, since the cables are connected directly to the motor and blocked by a cover, eliminating all risk of loose wires.

However, because the position of the tapped holes is not quite the same, you will need to get your hands on the metal structural components created especially by Robotis for their new creation. A variety of different sets are already available at our website!

Technical specifications of the Robotis XM430 servo

The XM430-W350-R servo comes with:

  • 1 HN12-N101 horn assembly
  • 1 Teflon washer
  • 2 x 180 mm X4P cables
  • 16 2.5x4 wrench bolts
  • 1 3x8 wrench bolt
  • 1 2x3 wrench bolt
  • 1 spacer ring
  • Operating voltage: 11.1 to 14.8V
  • Starting torque: 4.1 N.m
  • Stall torque: 4,8 N.m
  • Stall current: 2.6A
  • Torque: 49 kg.cm
  • No-load speed: 46 rpm
  • Range of rotation: 360°
  • Coreless motor
  • Reduction ratio: 353.5:1 (metal)
  • Operating temperature: -5 to 80 °C
  • Weight: 82 g
  • Dimensions: 28.5 × 46.5 × 34 mm


How to choose the right Dynamixel servomotor?

Resources for the XM430-W350-R robot servo

We’ve compiled a comprehensive collection of resources on the XM430-WR350-R, covering everything from software development, tutorials and beta testing to full support. Consider it a gift!

    My Dynamixel servomotor is not detected, what can I do about it ?

    Check that your Dynamixel servomotor is correctly configured. Do not hesitate to re-flash it with the ROBOTIS Software Roboplus. After re-flash remember to re-configure it. If the issue is not solved, contact us for an advanced support.

    My motor works but it seems like there is an offset. Why ?

    The motor is probably not well mounted. Check that you correctly mounted the horns by respecting the mark.

    My Dynamixel servomotor seems blocked. I can't turn it even when it is not alimented.

    There is probably a mechanical issue with the Dynamixel servomotor. You can directly contact us to get more advance support.

    My Dynamixel servomotor is not working properly.

    Check your power supply and the system cabling (try with a different servomotor). You can also reset the servo. If nothing works, the best solution is to go through the Dynamixel servomotor checklist!

    What is the difference between Protocol 1.0 and Protocol 2.0?

    The 1.0 protocol is dedicated to the Dynamixel AX and MX series. Protocol 2.0 is for the X and Dynamixel Pro series. Protocol 2.0 control tables include PID controls which allow for more precise adjustment of the servo motor movements. Protocol 2.0 can be updated on MX series servo motors. You can refer to the protocol 1.0 and protocol 2.0 pages for more informations.

Customers who viewed this item also viewed