The Dynamixel XM540-W150-T servo motor with a TTL interface belongs to the vast Dynamixel range of fully programmable, reliable, powerful and fast actuators, intended for the most meticulous robotics engineers.
The U2D2 board from Robotis enables you to supply a variety of power sources to your Dynamixel servo motors.
Suitable for industrial robotics operations, the Dynamixel-P H54P-100-S500-R servo belongs to a new series, even more reliable and efficient. Spectacular resolution and exemplary stability are on the menu, without compromising on programming possibilities.
To obtain the most innovative articulated robotics platforms, you need a talented designer (check!) and high-performance servos such as the XH430-W350-R, the latest creation of the Robotis team.
The 902-0044-001 pack contains 6 smart serial Dynamixel AX-18A Servos, an excellent low-end servo more powerful than the Dynamixel AX-12A.
Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!
The MX-28R is a Dynamixel servomotor, with high-level control features and very precise. This model is an improvement upon the MX-28R model, with an aluminium body allowing a better heat distribution, and a new fastening system.
10 cables (18cm lenght) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.
Horn and Bearing HN05-I1 for Dynamixel actuators
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
The Dynamixel M080-230-R051-RH, equipped with an RS485 connection, is an actuator in the Dynamixel-Y series developed by Robotis. This intelligent actuator offers top-level performance.
The Dynamixel XC330-M181 servo motor with TTL connection has more torque and a higher speed than the XL330 series. It also offers all the control modes so popular among Dynamixel fans.
Manufacturer reference: 902-0172-000
Bundle of all accessories required to configure and supply power to your Dynamixel servomotors.
More powerful and more precise, the new series of Dynamixel-P servo motors is a considerable improvement on the last. This Dynamixel PRO PLUS H54P-200-S500-R Servo is designed for hard-to-please users wanting to take full control of operations.
The Dynamixel XM540-W150-R servo motor falls in the X family of Robotis servos: it’s scalable and offers no fewer than 6 operating modes for controlling your robot with millimetre accuracy.
Available here in 24V with an RS485 interface, this Dynamixel wonder includes all the features the most hard-to-please robotics engineers have always dreamed of. The XH430-V350-R servo is suitable for all sorts of creations!
Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !
The Robotis Gear/Bearing Set for the MX-106 servo motor has been designed for the long-lasting replacement of your gear and bearing parts: robustness, endurance, and long life are the keywords here!
The MX-64T is a Dynamixel servomotor, with high-level control features and very precise. It is more powerful than the MX-28T but less than the MX-106T.
use this PCB connector to extend your constructions based on Dynamixel actuators
Horn and bearing set compatible with RX-64 (N101 type), EX-106+, MX-64 and MX-106 Dynamixel actuators.
10 cables (20cm length) with 3 pin connectors for the Dynamixel servomotors of the AX and MX-xxT series.